Talk to an Expert
Split System Air Conditioning in a bright West Pennant Hills home

West Pennant Hills, NSW · 2125

Split System Air Conditioning West Pennant Hills

Luxe Air installs Daikin, Mitsubishi Electric and Fujitsu split systems in West Pennant Hills, from a single wall unit for one room to a multi-head setup that runs several rooms from one outdoor unit. Most installs are finished in a day, with a fixed price agreed before we start.

  • ARCtick Certified Fully licensed & compliant
  • Australian Owned Proudly local
  • Premium Brands Daikin, Mitsubishi & more
  • Fast Local Service Same-week across Hills District
Wall-mounted split system installed in a West Pennant Hills bedroom

Local knowledge

Split systems in West Pennant Hills homes

Predominantly 1970s–90s two-storey brick family homes on generous treed blocks, with some renovated and knock-down-rebuild housing mixed through. Across that mix, wall splits are the fast path to conditioning the rooms that actually get used — bedrooms on the hot side of the house, a home office, or a living area that only earns cooling a few months a year.

Leafy, established family suburb wrapped around Cumberland State Forest. That shapes the install: we pick head positions for air throw rather than convenience, keep outdoor units off bedrooms and boundary walls where neighbours are close, and spec corrosion-protected coils wherever the street sits inside the coastal band.

Scope of work & pricing

What's included, and what moves the price

Every job is a fixed-price quote after an on-site look. Here's what's in scope, and what moves the number up or down.

What this service includes

  • On-site mounting review (wall, outdoor location, refrigerant line path)
  • Daikin, Mitsubishi Electric or Fujitsu inverter indoor head + outdoor unit
  • Refrigerant lines run through wall cavity (no exposed conduit unless unavoidable)
  • Condensate drain to eave or stormwater point
  • Wall bracket or slab for outdoor unit (where required)
  • Electrical connection to existing GPO or dedicated circuit
  • Vacuum and refrigerant charge per manufacturer spec
  • Wireless remote, controller walkthrough, warranty registration

What moves the price up or down

  • Indoor head capacity (2.5kW, 3.5kW, 5kW, 7.1kW, 8kW+)
  • Single-head vs multi-head (number of indoor units sharing one outdoor)
  • Refrigerant line length (longer runs = more pipework + gas)
  • Outdoor unit mounting (wall bracket adds labour + materials)
  • Wall material (brick / weatherboard / fibro / double-storey reach)
  • Existing power supply (new circuit vs existing GPO)
  • Strata or heritage compliance requirements
  • After-hours or weekend install premium

Not included (quoted separately if needed)

  • Plaster repair around indoor head if mounting requires it
  • Painting after install
  • Strata application paperwork (we can supply specs; lodgement is yours)
  • Brick / masonry core-drilling beyond standard wall penetration
  • Decorative line covers (white plastic conduit), quoted separately
  • Annual servicing (sold separately as a maintenance plan)

Process

How a split job runs in West Pennant Hills

  1. 01

    Site visit & system match

    We measure the room, check wall and outdoor mounting options, and recommend a Daikin, Mitsubishi Electric or Fujitsu model sized to the space, not oversized.

  2. 02

    Install booking

    Most single-head installs are done in a day. Multi-head installs (3–4 heads) usually run 1.5–2 days.

  3. 03

    Installation

    Indoor head mounted, outdoor unit on a wall bracket or slab, refrigerant lines through the wall cavity, condensate drain to the eave.

  4. 04

    Commissioning

    Vacuum and charge per manufacturer spec, controller walkthrough, warranty registration.

Service area

Split System Air Conditioning across the Hills District

West Pennant Hills is one of 12 Hills District suburbs with a dedicated split page. Jump to the local guide for any of them:

Frequently asked

Common questions about split system air conditioning in West Pennant Hills

How much does a split system cost in West Pennant Hills including installation?

Single-head: $1,800–$3,200 including installation, depending on capacity. Multi-head (3 heads): $5,500–$8,500 installed. Fixed quote after we see the room and outdoor location.

How much does a split system cost to run?

Roughly 20 to 60 cents per hour for most bedroom and living-room splits, up toward a dollar for the big 7–8kW living-area units on the hottest days. Correct sizing matters most: an inverter matched to the room cruises at low speed, which is where those low running costs come from.

How quiet is a modern split system?

Premium inverter heads sit at 19–24 dB(A) on low fan, which is quieter than a whispered conversation. We size the system so it runs on low most of the time, where inverters are at their quietest and most efficient.

Single split or multi-head for a West Pennant Hills home?

1–2 rooms cooled occasionally → individual single-head splits. 3–4 rooms regularly → multi-head is often the same total price and a cleaner outdoor look (one condenser instead of three).

Will a split system outdoor unit corrode in West Pennant Hills?

West Pennant Hills sits within the coastal salt-air band. We spec Daikin or Mitsubishi Electric units with corrosion-protected ("Blue Fin") coils as standard for Hills District homes.

Can you install a split system on a strata-managed West Pennant Hills unit?

Yes. We supply the compliance paperwork strata committees ask for (acoustic, mounting, drainage) and coordinate with the building manager on outdoor unit placement.

More services in West Pennant Hills

Every air conditioning service, in one local team

See the West Pennant Hills air conditioning hub or our full Hills District page for every suburb.

Recommended next step

Price your split job in West Pennant Hills in 60 seconds

Drop your address into our split system cost calculator for an instant size and price band, or send through photos for a full fixed-price quote. Same-day response in business hours.

Get Priced in 60 Seconds