Mount Annan, NSW · 2567
Split System Air Conditioning Mount Annan
Luxe Air installs Daikin, Mitsubishi Electric and Fujitsu split systems in Mount Annan, from a single wall unit for one room to a multi-head setup that runs several rooms from one outdoor unit. Most installs are finished in a day, with a fixed price agreed before we start.
- ARCtick Certified Fully licensed & compliant
- Australian Owned Proudly local
- Premium Brands Daikin, Mitsubishi & more
- Local Service Across Camden
Local knowledge
Planning a split system in Mount Annan
1990s and 2000s brick-veneer family homes on sloping blocks, a large share of them double-storey, with established gardens and maturing street trees throughout. Start with the rooms you want to heat and cool, then check indoor wall space and the outdoor pipe route.
A 1990s and 2000s family suburb on rolling hills beside the Australian Botanic Garden, with gardens and trees now well established. Include photos of the proposed outdoor position so access, drainage and clearance can be assessed with the room layout.
Scope of work & pricing
What's included, and what moves the price
Every job is a fixed-price quote after an on-site look. Here's what's in scope, and what moves the number up or down.
What this service includes
- On-site mounting review (wall, outdoor location, refrigerant line path)
- Daikin, Mitsubishi Electric or Fujitsu inverter indoor head + outdoor unit
- Refrigerant lines run through wall cavity (no exposed conduit unless unavoidable)
- Condensate drain to eave or stormwater point
- Wall bracket or slab for outdoor unit (where required)
- Electrical connection to existing GPO or dedicated circuit
- Vacuum and refrigerant charge per manufacturer spec
- Wireless remote, controller walkthrough, warranty registration
What moves the price up or down
- Indoor head capacity (2.5kW, 3.5kW, 5kW, 7.1kW, 8kW+)
- Single-head vs multi-head (number of indoor units sharing one outdoor)
- Refrigerant line length (longer runs = more pipework + gas)
- Outdoor unit mounting (wall bracket adds labour + materials)
- Wall material (brick / weatherboard / fibro / double-storey reach)
- Existing power supply (new circuit vs existing GPO)
- Strata or heritage compliance requirements
- After-hours or weekend install premium
Not included (quoted separately if needed)
- Plaster repair around indoor head if mounting requires it
- Painting after install
- Strata application paperwork (we can supply specs; lodgement is yours)
- Brick / masonry core-drilling beyond standard wall penetration
- Decorative line covers (white plastic conduit), quoted separately
- Annual servicing (sold separately as a maintenance plan)
Process
How a split job runs in Mount Annan
- 01
Site visit & system match
We measure the room, check wall and outdoor mounting options, and recommend a Daikin, Mitsubishi Electric or Fujitsu model sized to the space, not oversized.
- 02
Install booking
Most single-head installs are done in a day. Multi-head installs (3–4 heads) usually run 1.5–2 days.
- 03
Installation
Indoor head mounted, outdoor unit on a wall bracket or slab, refrigerant lines through the wall cavity, condensate drain to the eave.
- 04
Commissioning
Vacuum and charge per manufacturer spec, controller walkthrough, warranty registration.
Service area
Split System Air Conditioning across the Camden
Looking for split system air conditioning near Mount Annan? Find information for your suburb below.
- Split System Air Conditioning Camden
- Split System Air Conditioning Cobbitty
- Split System Air Conditioning Currans Hill
- Split System Air Conditioning Elderslie
- Split System Air Conditioning Gledswood Hills
- Split System Air Conditioning Gregory Hills
- Split System Air Conditioning Harrington Park
- Split System Air Conditioning Narellan
- Split System Air Conditioning Oran Park
- Split System Air Conditioning Spring Farm
Frequently asked
Common questions about split system air conditioning in Mount Annan
How much does a split system cost in Mount Annan including installation?
Single-head: $1,800–$3,200 including installation, depending on capacity. Multi-head (3 heads): $5,500–$8,500 installed. Fixed quote after we see the room and outdoor location.
What outdoor exposure should I allow for in Mount Annan?
Mount Annan gets both extremes of the Camden climate. The exposed west- and north-facing slopes take the full brunt of summer afternoons with no sea breeze to take the edge off, while the low ground toward the Botanic Garden holds cold air on still winter nights and frosts regularly, with July mornings around 3°C. No salt this far inland, but thirty years of garden growth means leaf litter on condenser coils is now the main maintenance issue.
Single split or multi-head for my Mount Annan home?
Compare the rooms used together and the available outdoor positions. Separate splits offer independent systems; a multi-head connects several indoor heads to one outdoor unit. We check the proposed model’s pipe limits and capacity against your layout before recommending either.
For general costs, options and how the work is carried out, read our split system air conditioning guide.
More services in Mount Annan
Every air conditioning service in Mount Annan, one local team
-
Ducted Air Conditioning Mount Annan
Whole-home reverse-cycle systems with discreet ceiling vents and zone control.
Read more -
Air Conditioning Repairs Mount Annan
Same-week diagnostics and repairs for all major brands across split, ducted and multi-head systems.
Read more -
Air Conditioning Servicing & Maintenance Mount Annan
Annual preventive servicing to keep efficiency high and breakdowns rare.
Read more
See the Mount Annan air conditioning hub or our full Camden page for every suburb. For citywide information, see split system air conditioning in Sydney.
Recommended next step
Price your split job in Mount Annan in 60 seconds
Drop your address into our split system cost calculator for an instant size and price band, or send through photos for a full fixed-price quote. Same-day response in business hours.