Talk to an Expert
Call 1300 322 093 Instant price
A bright living room with a wall-mounted split-system air conditioner

Normanhurst, NSW · 2076

Split System Air Conditioning Normanhurst

Luxe Air installs Daikin, Mitsubishi Electric and Fujitsu split systems in Normanhurst, from a single wall unit for one room to a multi-head setup that runs several rooms from one outdoor unit. Most installs are finished in a day, with a fixed price agreed before we start.

  • ARCtick Certified Fully licensed & compliant
  • Australian Owned Proudly local
  • Premium Brands Daikin, Mitsubishi & more
  • Local Service Across Upper North Shore
Technician working on a wall-mounted split system in a living room

Local knowledge

Planning a split system in Normanhurst

Predominantly modest single-storey post-war homes on good-sized blocks, with a growing number of renovations and rebuilds closer to the station. Start with the rooms you want to heat and cool, then check indoor wall space and the outdoor pipe route.

Quiet, leafy commuter suburb of modest post-war homes between Thornleigh and Hornsby. Include photos of the proposed outdoor position so access, drainage and clearance can be assessed with the room layout.

Scope of work & pricing

What's included, and what moves the price

Every job is a fixed-price quote after an on-site look. Here's what's in scope, and what moves the number up or down.

What this service includes

  • On-site mounting review (wall, outdoor location, refrigerant line path)
  • Daikin, Mitsubishi Electric or Fujitsu inverter indoor head + outdoor unit
  • Refrigerant lines run through wall cavity (no exposed conduit unless unavoidable)
  • Condensate drain to eave or stormwater point
  • Wall bracket or slab for outdoor unit (where required)
  • Electrical connection to existing GPO or dedicated circuit
  • Vacuum and refrigerant charge per manufacturer spec
  • Wireless remote, controller walkthrough, warranty registration

What moves the price up or down

  • Indoor head capacity (2.5kW, 3.5kW, 5kW, 7.1kW, 8kW+)
  • Single-head vs multi-head (number of indoor units sharing one outdoor)
  • Refrigerant line length (longer runs = more pipework + gas)
  • Outdoor unit mounting (wall bracket adds labour + materials)
  • Wall material (brick / weatherboard / fibro / double-storey reach)
  • Existing power supply (new circuit vs existing GPO)
  • Strata or heritage compliance requirements
  • After-hours or weekend install premium

Not included (quoted separately if needed)

  • Plaster repair around indoor head if mounting requires it
  • Painting after install
  • Strata application paperwork (we can supply specs; lodgement is yours)
  • Brick / masonry core-drilling beyond standard wall penetration
  • Decorative line covers (white plastic conduit), quoted separately
  • Annual servicing (sold separately as a maintenance plan)

Process

How a split job runs in Normanhurst

  1. 01

    Site visit & system match

    We measure the room, check wall and outdoor mounting options, and recommend a Daikin, Mitsubishi Electric or Fujitsu model sized to the space, not oversized.

  2. 02

    Install booking

    Most single-head installs are done in a day. Multi-head installs (3–4 heads) usually run 1.5–2 days.

  3. 03

    Installation

    Indoor head mounted, outdoor unit on a wall bracket or slab, refrigerant lines through the wall cavity, condensate drain to the eave.

  4. 04

    Commissioning

    Vacuum and charge per manufacturer spec, controller walkthrough, warranty registration.

Service area

Split System Air Conditioning across the Upper North Shore

Looking for split system air conditioning near Normanhurst? Find information for your suburb below, or see split system air conditioning across Upper North Shore.

Frequently asked

Common questions about split system air conditioning in Normanhurst

How much does a split system cost in Normanhurst including installation?

Single-head: $1,800–$3,200 including installation, depending on capacity. Multi-head (3 heads): $5,500–$8,500 installed. Fixed quote after we see the room and outdoor location.

What outdoor exposure should I allow for in Normanhurst?

Normanhurst is well inland, so salt exposure isn't a concern for outdoor units here. The bigger factors are the suburb's heavy tree cover, which drops leaf litter on outdoor coils faster than open streets, and cold, shaded winter mornings, which put real demand on reverse-cycle heating.

Single split or multi-head for my Normanhurst home?

Compare the rooms used together and the available outdoor positions. Separate splits offer independent systems; a multi-head connects several indoor heads to one outdoor unit. We check the proposed model’s pipe limits and capacity against your layout before recommending either.

For general costs, options and how the work is carried out, read our split system air conditioning guide.

More services in Normanhurst

Every air conditioning service in Normanhurst, one local team

See the Normanhurst air conditioning hub or our full Upper North Shore page for every suburb. For citywide information, see split system air conditioning in Sydney.

Recommended next step

Price your split job in Normanhurst in 60 seconds

Drop your address into our split system cost calculator for an instant size and price band, or send through photos for a full fixed-price quote. Same-day response in business hours.

Get Priced in 60 Seconds