Quakers Hill, NSW · 2763
Split System Air Conditioning Quakers Hill
Luxe Air installs Daikin, Mitsubishi Electric and Fujitsu split systems in Quakers Hill, from a single wall unit for one room to a multi-head setup that runs several rooms from one outdoor unit. Most installs are finished in a day, with a fixed price agreed before we start.
- ARCtick Certified Fully licensed & compliant
- Australian Owned Proudly local
- Premium Brands Daikin, Mitsubishi & more
- Local Service Across Blacktown
Local knowledge
Planning a split system in Quakers Hill
Predominantly 1980s–90s single-storey and two-storey brick family homes, with some earlier housing near the station and newer infill around the edges. Start with the rooms you want to heat and cool, then check indoor wall space and the outdoor pipe route.
A settled 1980s–90s family suburb where most streets are school runs and backyard cricket. Include photos of the proposed outdoor position so access, drainage and clearance can be assessed with the room layout.
Scope of work & pricing
What's included, and what moves the price
Every job is a fixed-price quote after an on-site look. Here's what's in scope, and what moves the number up or down.
What this service includes
- On-site mounting review (wall, outdoor location, refrigerant line path)
- Daikin, Mitsubishi Electric or Fujitsu inverter indoor head + outdoor unit
- Refrigerant lines run through wall cavity (no exposed conduit unless unavoidable)
- Condensate drain to eave or stormwater point
- Wall bracket or slab for outdoor unit (where required)
- Electrical connection to existing GPO or dedicated circuit
- Vacuum and refrigerant charge per manufacturer spec
- Wireless remote, controller walkthrough, warranty registration
What moves the price up or down
- Indoor head capacity (2.5kW, 3.5kW, 5kW, 7.1kW, 8kW+)
- Single-head vs multi-head (number of indoor units sharing one outdoor)
- Refrigerant line length (longer runs = more pipework + gas)
- Outdoor unit mounting (wall bracket adds labour + materials)
- Wall material (brick / weatherboard / fibro / double-storey reach)
- Existing power supply (new circuit vs existing GPO)
- Strata or heritage compliance requirements
- After-hours or weekend install premium
Not included (quoted separately if needed)
- Plaster repair around indoor head if mounting requires it
- Painting after install
- Strata application paperwork (we can supply specs; lodgement is yours)
- Brick / masonry core-drilling beyond standard wall penetration
- Decorative line covers (white plastic conduit), quoted separately
- Annual servicing (sold separately as a maintenance plan)
Process
How a split job runs in Quakers Hill
- 01
Site visit & system match
We measure the room, check wall and outdoor mounting options, and recommend a Daikin, Mitsubishi Electric or Fujitsu model sized to the space, not oversized.
- 02
Install booking
Most single-head installs are done in a day. Multi-head installs (3–4 heads) usually run 1.5–2 days.
- 03
Installation
Indoor head mounted, outdoor unit on a wall bracket or slab, refrigerant lines through the wall cavity, condensate drain to the eave.
- 04
Commissioning
Vacuum and charge per manufacturer spec, controller walkthrough, warranty registration.
Service area
Split System Air Conditioning across the Blacktown
Looking for split system air conditioning near Quakers Hill? See split system air conditioning across Blacktown for every suburb we cover there.
Frequently asked
Common questions about split system air conditioning in Quakers Hill
How much does a split system cost in Quakers Hill including installation?
Single-head: $1,800–$3,200 including installation, depending on capacity. Multi-head (3 heads): $5,500–$8,500 installed. Fixed quote after we see the room and outdoor location.
What outdoor exposure should I allow for in Quakers Hill?
There is no salt exposure this far from the coast, so condensers stay in good shape with basic care. The challenge is heat: summer heatwaves regularly hit 38–42°C, and brick homes from the 1980s–90s soak up the day's heat and release it into bedrooms at night. Systems here need honest sizing for that overnight load, not just the 3pm peak.
Single split or multi-head for my Quakers Hill home?
Compare the rooms used together and the available outdoor positions. Separate splits offer independent systems; a multi-head connects several indoor heads to one outdoor unit. We check the proposed model’s pipe limits and capacity against your layout before recommending either.
For general costs, options and how the work is carried out, read our split system air conditioning guide.
More services in Quakers Hill
Every air conditioning service in Quakers Hill, one local team
-
Ducted Air Conditioning Quakers Hill
Whole-home reverse-cycle systems with discreet ceiling vents and zone control.
Read more -
Air Conditioning Repairs Quakers Hill
Same-week diagnostics and repairs for all major brands across split, ducted and multi-head systems.
Read more -
Air Conditioning Servicing & Maintenance Quakers Hill
Annual preventive servicing to keep efficiency high and breakdowns rare.
Read more
See the Quakers Hill air conditioning hub or our full Blacktown page for every suburb. For citywide information, see split system air conditioning in Sydney.
Recommended next step
Price your split job in Quakers Hill in 60 seconds
Drop your address into our split system cost calculator for an instant size and price band, or send through photos for a full fixed-price quote. Same-day response in business hours.