Stanmore, NSW · 2048
Split System Air Conditioning Stanmore
Luxe Air installs Daikin, Mitsubishi Electric and Fujitsu split systems in Stanmore, from a single wall unit for one room to a multi-head setup that runs several rooms from one outdoor unit. Most installs are finished in a day, with a fixed price agreed before we start.
- ARCtick Certified Fully licensed & compliant
- Australian Owned Proudly local
- Premium Brands Daikin, Mitsubishi & more
- Local Service Across Inner West
Local knowledge
Planning a split system in Stanmore
Victorian terraces and villas from the 1880s–1900s, Federation cottages and double-fronted houses, a handful of interwar flat blocks near the stations, and newer apartments along the Parramatta Rd frontage. Start with the rooms you want to heat and cool, then check indoor wall space and the outdoor pipe route.
A quiet grid of Victorian and Federation streets under mature plane trees, bounded by Parramatta Rd to the north and running down to the Petersham shops on New Canterbury Rd. Include photos of the proposed outdoor position so access, drainage and clearance can be assessed with the room layout.
Scope of work & pricing
What's included, and what moves the price
Every job is a fixed-price quote after an on-site look. Here's what's in scope, and what moves the number up or down.
What this service includes
- On-site mounting review (wall, outdoor location, refrigerant line path)
- Daikin, Mitsubishi Electric or Fujitsu inverter indoor head + outdoor unit
- Refrigerant lines run through wall cavity (no exposed conduit unless unavoidable)
- Condensate drain to eave or stormwater point
- Wall bracket or slab for outdoor unit (where required)
- Electrical connection to existing GPO or dedicated circuit
- Vacuum and refrigerant charge per manufacturer spec
- Wireless remote, controller walkthrough, warranty registration
What moves the price up or down
- Indoor head capacity (2.5kW, 3.5kW, 5kW, 7.1kW, 8kW+)
- Single-head vs multi-head (number of indoor units sharing one outdoor)
- Refrigerant line length (longer runs = more pipework + gas)
- Outdoor unit mounting (wall bracket adds labour + materials)
- Wall material (brick / weatherboard / fibro / double-storey reach)
- Existing power supply (new circuit vs existing GPO)
- Strata or heritage compliance requirements
- After-hours or weekend install premium
Not included (quoted separately if needed)
- Plaster repair around indoor head if mounting requires it
- Painting after install
- Strata application paperwork (we can supply specs; lodgement is yours)
- Brick / masonry core-drilling beyond standard wall penetration
- Decorative line covers (white plastic conduit), quoted separately
- Annual servicing (sold separately as a maintenance plan)
Process
How a split job runs in Stanmore
- 01
Site visit & system match
We measure the room, check wall and outdoor mounting options, and recommend a Daikin, Mitsubishi Electric or Fujitsu model sized to the space, not oversized.
- 02
Install booking
Most single-head installs are done in a day. Multi-head installs (3–4 heads) usually run 1.5–2 days.
- 03
Installation
Indoor head mounted, outdoor unit on a wall bracket or slab, refrigerant lines through the wall cavity, condensate drain to the eave.
- 04
Commissioning
Vacuum and charge per manufacturer spec, controller walkthrough, warranty registration.
Service area
Split System Air Conditioning across the Inner West
Looking for split system air conditioning near Stanmore? See split system air conditioning across Inner West for every suburb we cover there.
Frequently asked
Common questions about split system air conditioning in Stanmore
How much does a split system cost in Stanmore including installation?
Single-head: $1,800–$3,200 including installation, depending on capacity. Multi-head (3 heads): $5,500–$8,500 installed. Fixed quote after we see the room and outdoor location.
What outdoor exposure should I allow for in Stanmore?
Stanmore sits far enough from the coast that summer afternoons arrive hot and still with no reliable sea breeze, but the mature plane trees along many streets take the edge off in a way the newer apartment precincts nearby never get. Traffic on Parramatta Rd and the aircraft approach over parts of both suburbs push residents to keep windows shut, which turns a well-shaded house into a warm one by evening. Humid nights follow, so bedrooms need proper cooling rather than a ceiling fan.
Single split or multi-head for my Stanmore home?
Compare the rooms used together and the available outdoor positions. Separate splits offer independent systems; a multi-head connects several indoor heads to one outdoor unit. We check the proposed model’s pipe limits and capacity against your layout before recommending either.
For general costs, options and how the work is carried out, read our split system air conditioning guide.
More services in Stanmore
Every air conditioning service in Stanmore, one local team
-
Ducted Air Conditioning Stanmore
Whole-home reverse-cycle systems with discreet ceiling vents and zone control.
Read more -
Air Conditioning Repairs Stanmore
Same-week diagnostics and repairs for all major brands across split, ducted and multi-head systems.
Read more -
Air Conditioning Servicing & Maintenance Stanmore
Annual preventive servicing to keep efficiency high and breakdowns rare.
Read more
See the Stanmore air conditioning hub or our full Inner West page for every suburb. For citywide information, see split system air conditioning in Sydney.
Recommended next step
Price your split job in Stanmore in 60 seconds
Drop your address into our split system cost calculator for an instant size and price band, or send through photos for a full fixed-price quote. Same-day response in business hours.